Intel D845GLLY Motherboard "bios showing correct memory speed" Questions

...BIOS ! ... it may correct the problem ... http://www.epox.com.tw/eng/support.php?ps=424&type=1 when using only one module at a time, doest it work on the correct speed 800Mhz ?! the system will be ...

...bios 701 and also its showing 4gigs of mem in bios but only can use 2.9..dont understand that when i have 64 bit and i have memory remaping enabled plz help Hi There, As the memory is ddr2 ram 200mhz ...

...Memory Slots 4 Error Correction None ------------------------------------------------------------------------ BIOS Top <#TOC> Property Value BIOS Vendor Phoenix Technologies, LTD BIOS Version ...

...BIOS setup. Check your settings concerning Integrated Graphics. some motherboards may allow memory to be extented. select your graphics settings... see first if it can be extended. if yes. save and ...

correct direction. Ur procesor fan is ok,but u r nt getting any screen like POST or anything.So u must check ur moniter first.The problem may be that ur CMOS or BIOS is gone.Check ur motherboard also.

BIOS did nothing. I had a 1 gig and a 512 memory modules. By removing either one, I solved the problem. Either would work by itself, but not together. There must have been a compatability problem with

...memory was working at 133MHz even though it reports 400MHZ. I have reinstalled windows several times, updated the bios, got the latest chipset drivers, dont know what else to do. The benchmarks show ...

...correct, A1 & A2. (Memory speed is questioned, DDR2 - 800MHz, Max of 8GB). In you're manual go to section 4.4.1 Make sure you're bios is set to Auto. PCIE Frequency set to Auto, pg 4-47. 95% of the ...

correct model # click get FSB after you do this your current clock speed should show up in MHz in the middle right box under where it says Set FSB. Above your current clock speed is a green box with a

...Memory Count hie , im using the 8i945P-G mobo and just recieved 4 (!) G.skill pc2-6400 1024 sticks ... wich is good so far. thwn i installed the first 3 the bios identifies them correctly and shows ...