Question about EnGenius Computers & Internet
my EAP 350 not supporting POE for more than 40 mtrs. i am using netgear prosafe POE switch. Thanks in advance Dear Rajkuma, As per poe 802.3 af specification only 50 Mtrs distance is supported. If you
...locations), purchased at the same time, from the same vendor. With 2, when connected using PoE Injector, the AP gets hot (at the Data/Poe port), and only permits 3 devices to connect before ...
Question about Cisco Computers & Internet
...but they all have the same issue ..."radios not installed" check that you have enough power on the PoE to power up both radios. Switch one off for clarity and see if 1 powers up. Also check the log ...
Question about EnGenius Computers & Internet
...outdoor access point. If I play around with the Power injector connections and unplug the LAN and POE connections about 30 or 40 times it finally comes on and works. The system is a new
3com wireless the router never start, just keep rebooting, i canĀ“t see it from my computer. the ip is in the same range, but the router never show. i connect to it by console port and i can see a ...
...you link go for it Should use normal str8-thru cabling. I've used a power injector and regular eia/tia 568a utp cable before with no problems. Now I use a PoE switch so i don't need a
POE connection. Have over hundred that work no problem with a few only working for short time then needing to be restarted. Any suggestions? i would try updating the firmware on your router and access
...problems, such as difficulty understanding and performing the configuration process, but again much more detail is necessary in order to pursue his issue. The March poster reports a symptom that ...
Question about EnGenius Computers & Internet
...to my Netgear router Attach the 3220 directly to your computer with an ethernet cable (through the POE box, of course). Allow it 60 seconds to start up. Make sure the address of your computer is ...
Question about D-Link Computers & Internet
...to another d-link dwl-7700ap i have connected one unit to one PC via RJ-45 (ethernet) using the PoE provided and have done the same with the other unit. However, though they are discovered ...
3 questions posted
Usually answered in minutes!
104 Questions
51 Questions
49 Questions
40 Questions
42 Questions