Hyundai 2010 Accent "mechanical problems" Questions

...Unfortunately the internal safety circuits are going to fight you here. The unit has detected a mechanical problem during the attempt to eject and shuts down to prevent further damage. You will ...

What could be the problem? Could it be the shock sensor? The timing belt of my accent 2010 cut and bend 8 out of the 16 valves, after replacing the valves it does not shock for it to start call a ...

to have a Zune 4GB. So what I did was look online what the problem is and I found out that it was a mechanical problem, and it only could be fixed by sending it in to Microsoft and writing a claim for

Coby mpc854 whenever i try to plug in my mp3 player into the computer while WMP is running it give me an error message that says WMP needs to close. if i try plugging it in before i open WMP i get the

i think it is a discontinued model i had the same problem but mine worked after i used lead from my mechanical pencil to press the reset button

...done. Then create a Repair Order online, or call Zune support at 1-877-438-9863, if you dare. That is your best bet. Y'all got mechanical problems and nuthin ain't gonna help that in FixYa. Sorry, ...

...setting your unprotected iPT on a table and see if problem is recurrent and electronic rather than

problem with the cd changer on my RCA Total Power 5 disc changer system RCA Total Power 5 cd disc changer. The CD door will no longer open or install the cds. It was operating and just stopped. There ...

tray wont open makes a buzzing sound usually this is cuased by a mechanical jam of the running gear of the tray, sometimetimes firmly pulling the tray out will fix the problem but sometimes this can ...

...with new CDs. Sometimes it will jump to end of CD. Problem appears to be electronic rather than mechanical as it disappears just as quickly as it appears. Hi, I reinstalled the original factory ...