Altec Lansing Speakers Acs43, Tested, Works, Power Cord "computer speaker cable connect stereo" Questions

...the speakers. 1. Plug its cable end into the power jack on the powered speaker. 2. Plug the power pack blades into the wall outlet. 3. Turn on your computer sound source or external sound

...computer speakers includes networking to the devices from where media from be derived either as computers stereos of media players. First, the speakers require connection established between each ...

...for speaker on the back of your computer. Do not force and cables, as they should fit with a gentle push into place on the speakers and computer. Visit your local Radio Shack or Staples for more

...set-just plug and match the colors from the speaker plugs with the adapter and buy a jack stereo to 2 rca cable and plug the rca connectors to the adapter and plug the stereo jack to you

...speaker until you hear a click sound. An LED will light next to the knob when the power is ON. Turn the VOLUME knob clockwise to raise the volume. Check volume level on the computer sound card or ...

...computer i have found some posts on your speakers very nice anyway hope this helps Just found an RCA to mono mini adapter and rca cable, plugged it in, and it works great. I notice a very slight ...

computer speaker )then you need an amplifier .Connect the speaker to the amp. then connect the laptop(output) to amplifier (input)the cable you need is "dual RCA male to 3.5mm male audio" .here is the

...connect it with labtec speakers which are for my pc. Not sure if the TV headphone jack would give you stereo out, but you can try that. If it's 1/4" jack, you'll need a 1/4" to 1/8" adapter. If that ...

computer to the speakers.I have a HP PC desktop with XP professional.Please help I've cut my old speaker wires. Just buy a soundcard that support 4.1 sound or better & you can use stereo cables or