light. Is there an adjustment i am missing??? Thanks Firstly make sure the gas knob is exactly in the pilot mode some are finiky and won't light unless in exactly the right postion. Make sure once lit
light flame is very high, is there any adjustments, this looks like it will use alot of natural gas. Too bad it was not electronic, this would make it even more efficient. Louie On the gas valve there
Question about Vulcan Kitchen Appliances - Others
Light pilot on Royal deep fryer. Pilot will not stay lit. Second fryer has larger pilot have no trouble keeping it lit. How can I adjust the pilot so that it will stay lit? there is a small adjustment
Question about Keating Kitchen Appliances - Others
...pilot won't stay light (adjust?) Set t/stat to 250 degrees. If it does not shut off after about 5 minutes, replace t/stat.If shuts off, must be calibrated Pilot may be dirty, flame weak. If flame ...
Question about Pitco Frialator Kitchen Appliances - Others
adjustment screw other than the one directly next to the pilot gas line & that did nothing. Ideas? If you didn't figure it out already you lost the orifice on the pilot light. It's a
Question about Imperial Kitchen Appliances - Others
light should stay on. If not most likely the thermocouple is bad. You might need to adjust the amount of gas going to the pilot. There will be a small adjustment screw on the main gas valve near the 1
...light and go back out. when you flip swith you can hear the igniter and the the pilot lights flame on pilot looks bigger on first one that work is the pilot ajustable cant find adjustment Hi there! ...
Question about Frymaster Dean Kitchen Appliances - Others
...light lights but is a low flame There is an adjustment screw on the main gas valve, usually under a cover screw. It will be near where the small pipe that goes to the pilot light. If you are talking ...
...light. check if pilot flame reaches the ignitor tip, if it does, check the connection of or replace the ignitor cable.if it does not, adjust he ignitor so that pilot flame will have good contact with ...
...pilot light could you explain how? Thanks Hi there. Pilot light on Millivolt Gas Valve can be adjusted by removing the screw (with pilot adj mark) just below the gas valve knob and tightening (to ...
103 questions posted
Usually answered in minutes!
180 Questions
55 Questions
17 Questions
6 Questions
6 Questions