Pitco Frialator SG14 Deep Fryer "millivolt generator" Questions

...turns off the pilot. what can i do to prevent this from happening? Check the millivolt output of the pilot generator. Sounds like low millivolts. Replace the pilot generator and you should be good. ...

what is the problem when millivolt gas valve can not keep it pilot on? Hi there. Probably the thermopile is not receiving enough heat from the pilot flame to generate 500 to 750 millivolt to hold ...

...as soon as we turned thermostat pilot went out. When you turned on the thermostat you required more millivolts from the system and it failed. Low millivolts. That would tell you the pilot generator ...

...stay lit after releasing when lighting gas fryer This symptom indicates something wrong with the millivolt system. Start by checking the wires from the thermopile to the gas valve, insuring they ...

We changed the thermostat in our unit and now the pilot lite won't stay lit! You have to check the following: 1. Does the pilot flame has the ability to heat up the thermopile? Themopile must be ...

why grill thermostat clicks but will not come on Thermostat defective, or pilot flame too low to generate required millivolts at pilot generator

My Pitco 35c4s fryer's pilot works fine but when i My Pitco 35c4s fryer's pilot works fine but when i position to on and set the temperure, it don't fire up and shut the pilot fire off. Any ...

...or thermopile. If the thermopile is not heated correctly by the pilot, it cannot generate enough millivolts to open the gas valve. The same is true if the thermopile is faulty. Thermopiles consist ...

hello i have a J5 lincat fryer and the pilot stays alight but the burners won't connect (light) have replaced the thermostat and the thermo couple but still no joy any ideas on this not sure what ...

...or any form of dirt so that it coud absorb the right intensity of heat from the pilot flame for millivolt generation used in energizing the pilot and main valve electrical coils for pilot and ...