Pitco Frialator SG14 Deep Fryer "checking thermopile" Questions

Pilot light keeps going out! Will not stay Lit. Check if the the gas pressure is sufficient (as stated on unit's nameplate). Check if the hi limit device is good. Check also if the thermopile ...

How much current should the thermopile generate on a Pitco VF35-s Frialator The thermopile is generating about 90 mv. How much should it be? That doesn't sound out of line for a cold thermopile. Check

PILOT LIGHT WONT STAY LIT i CHANGED THERMOPILE pilot flame to small over temp safety thermostat trip dirty connection points thermocouple fail not the same as thermopile fail thermopile drives the gas

i have a used sg-14 pitco that i want to use outsi... i have a used sg-14 pitco that i want to use outside for my family reunionsdo i have to use a large tank oflp or can i use a 30-lb tank when i ...

what is the problem when millivolt gas valve can not keep it pilot on? Hi there. Probably the thermopile is not receiving enough heat from the pilot flame to generate 500 to 750 millivolt to hold ...

my fryer wont lit up the fire.only the pilot works Check if there is sufficient gas supply as stated on the unit's nameplate. Check if there is no soot/ carbon build up on the thermopile for this ...

pilot is on but main flame wont start up Check first if there is sufficient gas pressure and volume for the unit as stated on its nameplate.Try to check if the thermopile receives enough heat from the

fryer cut off but pilot stays on fryer was used with outside concessions on a 20lb lp cylinder. moved to inside concessions on a 100lb cylinder. Worked good about 2-3 hrs. then the fryer would cut off

pilot light will not stay on Try to clean the thermopile, it should be free of dirt/ soot so heat from pilot flame could be sensed better. Thermopiles generate small amount of voltage when heated ...

We changed the thermostat in our unit and now the pilot lite won't stay lit! You have to check the following: 1. Does the pilot flame has the ability to heat up the thermopile? Themopile must be ...