...fix. Unplug the machine, unplug the connector fromt\ the document feeder to the scanner. One white molex connector with 2 thumb screws on back. Lift the document feeder up and out, and lay it upside ...
...fix is to remove the four screws visible in the holes when you open the scanner lid. A T10 Torx tool is required. Tape the scanner housing to the mid body housing to keep the two parts together. ...
...fix sites its possible to reset the drum life on 5500s 9300s and many other okis but have not yet come across the solution for my c5800. Any help out there? You don't need to go through all that mess ...
Question about Dell Office Equipment & Supplies
...metal piece and hook it behind the black roller. Next, locate the two knobs on gray s-piece with the arms on the sensor so that they align with the top of the arms. Ensure that the spring's free arm ...
...metal edge all along the length of this hole and if you look further back you will see a thin plastic length which the head also travels along. What can happen is this gets twisted at the print head ...
...fix will work for you. The belt has a reflective sensor which passes an optical sensor with every pass, which delivers a pulse to the processor. This pulsing is what tells the processor that the itu ...
...metal piece and hook it behind the black roller. Next, locate the two knobs on gray s-piece with the arms on the sensor so that they align with the top of the arms. Ensure that the spring's free arm ...
...fix your printer the bad news is getting to the adjustment point is going to require removing all the plastic covers from the printer. Remember you don?t want to drop any screws, I did and spent a ...
...fix the problem. Next remove the flat white data cable from the head. Do do that, unclip the top cover with the clips at either end of it, and carefully pull the white cable out of the circuit board. ...
30 questions posted
Usually answered in minutes!
1,024 Questions
996 Questions
1,049 Questions
812 Questions
732 Questions
