Behringer XENYX 5-Input Mixer 302USB "noise" Questions

I have a Static noise coming from the right channel of my mixer. I hear it coming out the right speaker as well as the right ear of my headphones (jack). How can I fix this? The static noise comes off

... Output VU meter - This three-segment bar meter shows the XP200 output level. For optimum signal-to-noise ratio, set the Volume control (see #6 below) so that program material is usually at or around ...

...you blow the amp. Tapping a 9V battery across the speaker (disconnected from amp) will cause a noise in the speaker, if not it is a broken wire or bad speaker. Good ...

static noise when headphones are plugged in and there is no inputs or outputs Unless the levels are turned down I would expect that. It probably is what is called pop-corn noise. Turn the levels down ...

...to jack up the in-camera pre-amps considerably, resulting in an inferior recording with lots of noise. Try feeding the Mic Out to a mic preamp, such as an RDL

why mixer turns on but no sound come out, just a weird interfearance noise any ideas? Be sure the inputs are OK and the amplifier is also working. It is probably the internal power supply but that is ...

1 channel on my soundcraft board is not working (static, noise etc.) how can I fix it without tearing apart the board? When i am using the channel and the slider is 80% to the top there is noise that ...

...When I listen to the output, I can hear the game audio perfectly but I can't hear any noise coming from speaking into the microphones. When I tap or bellow into the mic I there is a ...