Crooked Paper I have a Lexmark X1270 and the paper is constantly being fed in crooked, especially labels. Any suggestions? Are ou fanning the paper before you put it in and cloing the paper guides ...
paper feeding in crooked Check that all of the sliders in the feeder tray are snug against the paper. Sometimes they tend to slip out and allow the paper to wiggle in the tray resulting in a crooked ...
Question about Lexmark X Office Equipment & Supplies
...goes a small ways then stops while the printers keeps printing. The small amount it does feed goes in crooked before the printers says it has a paper jam something in the paper path blocking its
Paper comes out crooked. A piece of paper or something traps the paper path then remove it or sometimes it happens when using a thin paper or substance 16 of bond paper, use only substance 20 or 24. ...
paper goes crooked the jams when i print the paper feeds crooked, then it will tell me that i have a paper jam. i dont know if maybe the paper is to thick or what could be the problem, if you know ...
...paper to get crooked. It can also be caused by improperly adjusted paper guide or the paper is not in good condition. Paper Feed Rollers Are Rolling But the Paper Is Not Feeding How the Accu-feed ...
Question about Lexmark X Office Equipment & Supplies
...crooked lexmark x4530 paper jam! paper begins to feed then goes crooked and jams. it seems like one of the wheels is not working. is this something i can fix or should i throw it away and buy an new ...
...paper wont feed through my printer, it goes in crooked. IF IT COVER AND MAKE SURE THAT THERE ISN'T ANY PAPER RESIDUE FROM A PAPER JAM. THEN CLEAN EACH ROLLER THAT YOU SEE WITH A DAMP CLOTH WITH A DAB ...
...crooked. help The paper tray is normally set for 8.5 x 11 sheets of paper. There are adjustments to allow for a variety of papers. Make sure the paper guides in the supply tray are properly set. The ...
...paper in crooked, I think one of the feed wheels is not working. The paper does not feed entirely in when printing. Is it possible to change the rubber on the feed in rollers? check for anything ...
246 questions posted
Usually answered in minutes!
1,487 Questions
1,353 Questions
1,277 Questions
961 Questions
741 Questions