Lexmark 2381 Plus Matrix Printer "ribbon spindle working" Questions

...ribbon take-up spindle release knob counterclockwise, squeeze the ribbon against the ribbon take-up spindle tension blades. When the tension blades collapse into the ribbon take-up spindle, hold the ...

...spindle of the ribbon cartridge. Push until the spool clicks onto the spindle. ? Put the empty take-up spool on the spindle with the solid black gear. Push until the spool clicks onto the spindle. 6: ...

ribbon spindle is not performed or not correctly detected. This can be due to various factors. - The ribbon roll is not correctly fitted to the spindle. - The sensors detecting the rotation are out of

...Ribbon Off the Spindle? I need to recalibrate the ribbon for my Zebra s600, but I can't seem to get the used ribbon off of the spindle. I know this is a stupid question, but how does the "ribbon ...

ribbon take-up spindle does not turn I initially had the same problem and then found I had to set the paper type to TTR and by doing so the ribbon take-up spindle started turning, the default paper ...

...ribbon spindle. This was apparently a bad move, as the spindle has lost all tension and will no longer pull on the ribbon. Is there any way I can fix this? For the issue with your ribbons take the ...

...That probably means that your Thermal ribbon is not correctly fixed on the spindle or not in the right inking. Normally on zebra printers the inking must be outside. Check on your user's ...

...spindle where the ribbon's take-up spool/wheel locks into. It may need a bit of cleaning and/or lubrication; the printer head is slightly adjusted away from the paper. Normally, there is a mechanical ...

...spindle where the ribbon's take-up spool/wheel locks into. It may need a bit of cleaning and/or lubrication; the printer head is slightly adjusted away from the paper. Normally, there is a mechanical ...