Lexmark Optra M412 Laser Printer "load manual feeder error" Questions

...an error message. it is telling you to load the Manual Paper feeder. Put some papaer in it and it will print. check youyr set up to make sure that you are printing to the trays not the manual ...

...load the Manual Paper Feeder You might have selected the printer settings for manual feeding. Hence you need to feed that papers in manual feeding tray. You can change the settings to automatic paper ...

...load paper in the Auto Sheet Feeder. Print Head nozzles are clogged. Press the RESUME/CANCEL button on the printer to clear the error, and then print out the nozzle check pattern to examine the print ...

...load paper in the manual feeder, when there is already lots of paper in the tray! Please help! Check the paper settings on your word processor. Most probably you picked either a paper type or paper ...

...manual) feeder paper detector lever was jammed in the 'pressed in' position. I pulled it out and moved it back and forth several times until it would stick anymore when I pressed it in. This lever is ...

...load paper", there is paper in the multi sheet feeder bin. (the single sheet feeder works fine). The machine apparently does not "see" that there is paper loaded in the feeder bin. Is there a sensor ...

...load paper (1 is the manual feeder)
when you open tray 1 there's an engine-test switch, found it and press it

Engine error are also cause too much resistance from toner, fusor or gears. ...

feeder option. For a larger image, click here. 6 Finally, reinstall all of the paper trays and press the button to try printing again. NOTE: You may receive a different paper jam message informing you

...Load a piece of thick paper, for example photo paper and press the resume button (may be diffrent button on diffrent models) a few times to the printer picks up the paper and puts it through the ...

...manual advises me to open ADF lid how do I do this? An ADF lid would be the automatic document feeder lid....should be where you load what you want copied and chances are it got stuck in the rollers ...