Lexmark Optra SC 1275 Laser Printer "problems replacing drum" Questions

...replacing it again, the printer is printing very lightly with lots of blotches again. I checked the cartridge and it looks fine... Not sure where to go from here. check the Technical Support Team for ...

two dots on right side of page I get about 3 spots on the right side of the page, the spots are on the exact same spot on each page. I have replaced the printer with a new photoconductor and all new ...

...replacing this part will clear up the prolem or repace the whole fuser depending on the wear. toner cartridges can also do this for the toner to do this its usually a expose drum has been set down on ...

Two black dots on right side of page I get a pair of black ink dots spaced vertically about 2-3 inches only on the right side of a printed sheet. There are usually about 3 sets of these on a page, I ...

Drum light flashing in spite of new drum unit and new toner cartridge common problem. The Drum LED blinks if the drum unit is near the end of its life. Use the drum unit until you have a print quality

...drum even after replacing toner cartridge. am i having a drum problem. I would have to say that you are having a problem with your drum unit and or the developing unit. Most likely the problem is in ...

Replacing the drum was fine, but after the replacement, print quality became extremely poor. Letters have lost most of their thickness and thin lines are not even printed. Everything just looks faded.

I have a problem with my Ricoh Aficio 2022sp. It leaves a black line when I copy or print anything. Something around the drum need to be replaced. There are two ways to be done. Because Ricoh do not ...

printer drum light on drum light is on it still prints but have light ink smudge marks on paper Have you already replaced the drum? If you have not replaced the drum that may be why you are getting ...

...i printed 20 copies it show a problem Drum catridge smart kit is fault i replaced a new drum chip same it work for 30-40 copies after same problem. Have you tried replacing the whole drum