Lexmark Optra E312 Laser Printer "stick" Questions

...out wrinkled - gets too hot and warps. your fuser my be damage on one part making the paper to stick to it check fuser thank ...

...using this for long time. It requires cleaning most especially the roller, Just use a cotton buds stick with alcohol to clean the roller and let it dries up. Another is check some paper jammed in ...

Std Bin Full My Optra T614 says Std bin full on the message screen even through there is only a few sheets of paper in tray 1. Does it mean something else? If you see the flag at the paer exit, where ...

...take the paper out of tray one and fan the paper to break any static that may cause the paper to stick together. ...

...lift the cover off at the top of the control there is a clip that goes into the hinge assembly stick a screwdriver under the top of the panel and pry up wards this will allow the control panel

it grabs several sheets of paper at one time it grabs several sheets of paper, sometimes a stack of paper to be drawn down through the printer. This is most likely a paper problem, the paper is ...

constant paper jams in lexmark t614 it would help to have a bit more information on where the paper jams. but ill give this a shot any way. 241 jams clean or replace the pick wheels on the auto ...

I bought a used Lexmark Optra SC 1275 a few years ago for a home office. It took a LONG time to spool up and for some jobs it just took forever, so I really didn't use it much after I got it. I ...

Only prints from the MP feeder and not through tray 1 anymore if your printer only prints from the mp tray this is saying that it no longer recognizes tray one. the first thing to check is the paper ...

...board on the left may be defective. The left side of the tray has a matrix of 3 plastic tabs that stick out in certain order depending on the tray setting. If this board fails, it may show