Lexmark E320 Laser Printer "cleaning transfer roller" Questions

...working fine, it could be the transfer roller that's causing the faint prints. I would suggest cleaning the transfer roll with a soft cloth. If problem continues, you might need to replace the

...cleaning prossess,, says ready,,,changed paper type take a q-tip and clean the scanner window. this is located in a 3/16' opening on the roof of the printer cavity it will be about 8inchs long. pull ...

...transfer roller on the bottom inside this has two black tabs that release the roller the one on your left (again looking into open printer) should have a metal strip that should be free of toner on ...

...transfer roller also or lastly clean the laser printhead itself it is able to be reached after removing the toner cartridge and using a DRY soft cloth to wipe back and forth along the fingerwide slit ...

...transfer roller, or neither. Any help much appreciated. Thankyou Ben Hi, If the Toner Cartridges are OK, the faint image is certainly due to the dust/ toner dust on the optics inside the printer, ...

transfer roller dirty, especially if inside of printer looks like it needs a cleaning. You could vacuum with toner vacuum or take it in for service. 2. scanner mirrors dirty. would need to be serviced

...is at end of life and needs to be replaced. If no toner is visible, try cleaning the CTD (ADC) Sensor. The ?Transfer Roller is at End of Life? is a warning. ?Replace Transfer Roller? is a hard

...belt.Remove 2 screw and change it.The bias transfer roller is mounted in two bushings,remove the bushings and 2 springs.The fuser unit : upper fuser roller,lower fuser roller and the cleaning

It has been 2 years since I had service on the machine. The transfer roller is cleaning use to a vacuum cleaner.The black lines is caused to dirty charge corona or charge roller.Clean the charge unit

...transfer roller is a foam roller that transfers the toner onto the paper. It will be visible with toner removed, a little wider than a piece of paper, and about the thickness of a roll of quarters. I ...