Lexmark Optra T610 Laser Printer "hold" Questions

...on 8x10 page printing very small and light . I would like to print on the whole page 8 x 10... hold right arrow go and return buttons down and hold power the unit up ubtill you see activity in ...

no power on Unplug it from the power outlet and plug it into a wall power point. If no luck, you might have had a power surge and the power supply has broken. To replace it, remove the back plastic ...

my se3455 is stuck on demo mode Power of the machine. Press and hold button 2,3 and 5 and power up the machine till the masage reset....... apears.

small plastic piece that holds spring on paper feed in main paper tray broke. Need replacement part or service. lemark calls this the bell crank ofr the autocompensator 56p1331 lexmark want 27.00 use ...

...2-remove the top cover. 3- remove the cleaning pad cover and the pad, 4-take out two screws that hold fuser, 5-unplug fuser (two plugs, power and sensor plug) 6-remove ...

...954 nvram card error Whats the fix? this is an error that will return you can reset it sometimed hold the right arrow select and go buttons down and power the unit on. when you see action in the ...

...access the Diagnostics Menu.To enter the Diagnostic Mode:1. Turn the printer off.2. Press and hold the Go and Return buttons.3. Turn the printer on.4. Release the buttons when "Performing Self ...

...There is now default password. The default is without password. Did you try a cold reset?? Push and hold down butons 2,3 and 5 while powering on the machine. Release the buttons when innitialisation ...

error 9454 im thinking that you mean a 954 nvram error if thats so hold down the right arror, the go button , and the return button power on the machine untill performing self test comes up and ...

how to cealn memory lexmark x 466 If i remember correctly you can just hold 2+6 on boot up to put you in the config mode. Next find factory defaults reset the LES (Lexmark Embedded Solutions) Base ...