Lexmark Optra M410 Laser Printer "1" Questions

OPTRA T610 NOT PRINTING FROM TRAY1 Thanks for your help, but my T610 will not print from tray 1. It will however print from tray 2. When printing from tray 1, sounds like it is going to print except ...

...the output to the three output bins on this printer....Can you email me at [email protected]. Thanks. Vince I used the Optra W810 driver. It had listing for *UPPER and *LOWER for the ...

913 service motor error The printer does not complete the self test it end sup with 913 service motor error. If this is the first time you have seen this error, do the following: Power off the printer

Refurbished Lexmark W810N -- communication problems Got "54 network 1 software error". Reseated the network card and got something like "network 1 wrong code". Can't ping the printer. Older system can

...the code. First try this link: ...

977 service netwrok card 1? I just "inherited" a 1250 lexmark and I can't seem to get anything going, it's installed, but a message on the screen says "977 service Network card 1" I have no idea what ...

Recently I have gotten a message, Recently I've been getting a message, "Change tray 1," along with an error beep. What do I do? The application you are using is calling for a specific size or type ...

...LOAD PAPER 28 I HAVE TRIED TO GET THE PRINTER TO PRINT BUT IT WON'T. IT SAYS LOAD PAPER TO TRAY 1, BUT THERE IS PAPER IN TRAY 1 IF IT IS THE ONE AT THE BOTTOM. TOTALLY CONFUSED. BOTH THE PRINTER ...

optra 2450 error 241 Optra 2450 tray 1 error 241 24X Paper Jam message displays, Paper jammed over the Pass Thru Sensor. (The printer displays the value of X for the paper tray where the error occurs.

paper source I have a lexmark optra s1625 that pulls paper from the manual feeder tray (fold-out tray) even though I have the paper source set for tray 1 and the feeder tray is closed. Some print jobs