Question about Lexmark T Office Equipment & Supplies
...1". We then press the check button and the print job then prints. If we print something else immediately, it will print. If we wait say 30 seconds or more to print, the error messages start all over ...
Question about Lexmark T Office Equipment & Supplies
...1 (top) as default This is for a Lexmark T640 printer. We used to have the top tray set up as the default for legal size paper when we were printing an Excel spreadsheet. And the bottom tray was the ...
...1 either to paper size letter or any then paper type to ANY 2- set tray 2 to Letter and Plain 3- go to file - print - right click on printer- properties- device settings make sure you have the ...
...printing, however, it will only take paper from the upper tray, or MP feeder. Any ideas? Thanks, Gordon Check your paper configuration. Make sure Tray 1 is configured for Plain paper and is showing ...
...either you selected manual feed or the setting for the default try (usually tray 1) is not set to the correct paper size. In your case, make sure the green slide adjustment on tray 1 is set to
Question about Lexmark T Office Equipment & Supplies
...1 to plain paper universal print the network page to verify the printer is reporting the wrong size paper. this page is outlined by a box if it prints smaller than tne page or the bottom line of the ...
...printing when for example tray 1 is empty - at the moment if tray 1 is empty the it automatically selects paper from tray 2 or 3 or 4. refer to this link ...
Question about Lexmark T Office Equipment & Supplies
...1 or 2. Make sure that the green paper guide in the paper tray that you want to print from is latched in the correct position. This guide tells the printer what size paper is in the tray. If you have ...
Question about Lexmark T Office Equipment & Supplies
...printing we select tray 2 in the program and pull out tray 1 to test if it still pulls from tray one and when the printer gets the job it give the alert to reinsert tray 1 and wont print until tray ...
...menu and then to paper menu and adjust/ confirm the settings for tray 1 and 2. Based on your question tray 1 is letter and tray 2 is legal, so make sure both of the tray size and type are set
170 questions posted
Usually answered in minutes!
129 Questions
130 Questions
122 Questions
152 Questions
41 Questions
