Lexmark X125 All-In-One InkJet Printer "microwave gets wet" Questions

wet paper towel in a microwave oven and set the ink cartridge with the jet are in contact with the hot towel. That sometimes will clear the jets. If you see ink on the paper towel the jets are flowing

wet paper towel, put in the microwave get it really hot. Draw the cartridge over the hot wet towel (in one direction only) till the ink flows. Then take a dry paper towel and draw the head over it the

...wet cloth in the microwave to get it hot enough to produce a little steam and set the cartridge, nozzles down on the damp cloth until ink starts to ooze from the cartridge. May require a couple of ...

...wet the paper towels with water and place in microwave and heat them up really hot. Take you ink cartridge and place the ink exit area on the paper towel and rub it back and forth. This will wick the ...

...Microwave the wet towel of about a minute until it is steaming hot.Take out of oven Place the print head on the hot towel and press it lightly into the towel Leave the print head on the towel for 30 ...

...microwave. Put tip (head) of cartridge in coffee mug for 15 minutes. Take cartridge out of coffee mug and hold tip (head) under hottest faucet water for a few minutes. Dab (do not WIPE) on a paper ...

...microwave for about a minute or so, not boiling. Slowly pour over the paper towels so that you have approximately 1/2 inch mixture total. Set the printhead (cartridge holder) into the container and ...

...microwave for about a minute or so - it should NOT be boiling. Slowly pour the water or mixture over the paper towels so that you have approximately 1/2 inch of liquid in the bottom of the pan. Set ...

...microwave for about a minute or so - it should NOT be boiling. Slowly pour the water or mixture over the paper towels so that you have approximately 1/2 inch of liquid in the bottom of the pan. Set ...