Question about Lexmark E Office Equipment & Supplies
how do you reset the imaging unit on a Lexmark MS610dn This should reset automatically when you purchase a new imaging drum. If it did not,contact Lexmark as they should warranty the new drum unit.
...drum ***'y. you replaced the drum but you need to replace the toner as well (low toner) then turn off and hold the start key an dturn on to get into service mode, scroll to reset photo count,
...life please replace .. i replaced still same message same lites keep blinking low toner replace drum and will not print anything except when i push the continue butten and it prints,printer has ...
...reset the pc count on your printer. Please click on the link below for the steps. http://bitly.com/r8ZhYJ If you need further assistance, please contact Lexmark Technical Support Center. A NOTE OF ...
Question about Lexmark E Office Equipment & Supplies
CANCEL" wait leds blink; 4 - Release "CANCEL; 5 - Close the door. This is the end of the history. This doesn't reset the page counter for the printer. It DOES reset the photoconductor (drum) pagecount
Question about Lexmark E Office Equipment & Supplies
...reset the drum counter (see user guide for this E120, it can lead to problems if you don;t replace the drum unit. I've seen E120 drum units packed full of waste toner, to the stage where they won't ...
Question about Lexmark E Office Equipment & Supplies
reset the photoconductor (drum) counter ? You have to do this manually, as there is no chip on the photoconuctor, so the printer doesn't know its been changed. http://www.lexmark.com/publications/pdfs
Question about Lexmark E Office Equipment & Supplies
paper get stuck coming out to the feed have to open the back and pull it out note i installed new drum and toner need to reset ur toner chip
Question about Lexmark E Office Equipment & Supplies
to reset the drum counter, if not a call to Lexmark tech support will answer your question. We have one at my work and have had to replace our drum already. It was simple and the tech was very helpful
Question about Lexmark E Office Equipment & Supplies
...button on left side). 2. Press and hold the cancel button (x button) until all the lights flash in order. 3. Then close the front cover. This will reset the drum counter to enable continued
60 questions posted
Usually answered in minutes!
224 Questions
171 Questions
106 Questions
83 Questions
56 Questions