Lexmark Z53 Color InkJet Printer "starts print quits" Questions

Blinking light The power light continues to blink despite my efforts to turn it off. The printer will not print. I reseated the color cartridge and--Bingo!--the light quit flashing and the printer ...

...print a partial page, then it slowly quits again. I've tried the soft, medium, and hard clean cycles for the heads, no difference in performance noticed. Replaced the cartridge with a new hp. Started ...

...quits so while printing a large solid page, will start printing magenta, go on printing for a bit then quit printing. Cartridges are full, print head weighs 15 gm (while other printheads weigh in at ...

Photo prints are very dark and muddy When I first starting printing with my C6180 I thought the print quality was quite good. At some point, however, my prints started printing quite dark and I can ...

...starts to print for about one line of print now it is printing about 2 1/2 inches of the text then it beeps and quits, viewing box shows carrige jamb and the printing cartridges stick all the way to ...

...quits. After a while, say 30 to 45 minutes, it will start printing again. But there are black smudges on the edge of the paper. Sounds like a fusing error ... If your able to wipe the toner off the ...

alarm on: reads wrong cartridge in window Alarm light and message came out of the blue. Had not printed in quite some time and have had issues with lines running through my images. Thought there was ...

it just quit printing and copying it just quit printing and copyin. It printed a file fine. when I tried to print the next one - I thought it was printing - but nothing just as if it was out of ink. ...

We have a HP 1020 Laserjet printer. since 9/9/10, it has given us a message that the printer spooler is not running. I have unistalled the printer and re-installed it. It will start the printing job ...

...quits priting again. It will print one document after I power cycle the printer and then quits. The panel says "Ready". I can ping the printer just fine. Any ideas?? Sounds like low toner to me. If ...