Lexmark Z53 Color InkJet Printer "light stays new cartridge inserted" Questions

...light blinks twelve times while no cartridges are installed, there is a problem with the printer. If this is a new purchase, you can also exchange the printer at the point of purchase. If the paper ...

...light stays on Toner light was on. Replaced cartridge with new toner, light stays on and printer will not print. Light is NOT flashing, just steady light. I found this and it worked great. 1. Power ...

...light of my Minolta magicolor 2400W Laser Printer stays on. I have inserted a new drum and all the cartridges are full. What do I do? Try to open the blue cover and close it. Then press a few times ...

...light on stays on despite inserting new cartridges try cleaning the contacts (golden patches) on the cartrige and on the print head. also try to do a 'print head clean' from the service / maintenance ...

...light showing,with New ink cartrige inserted showing toner low replace cartrige on machines display? Help!! thanks Remove the cartridge, take a flashlight and check the right side inside the printer ...

...stays on Make sure you have removed the protective tape properly from the cartridges. Make sure they are in the right positions. If you have the old ones see if the orange light goes out by swapping ...

...light on the control panel stays on. You must replace the cartridge to be able to print. 2. Open the scanner and prop it up with its support. 3. Press the Stop button. The print head moves to the ...

...light stays on, then it means a ink cartridge is empty. By downloading SSC Service Utility you can solve about any problem you have with a C60. That's what the "Service Engineers" use. Check out the ...

cartridge and the unit will not detect it. At first when I installed the PGI, the lights for all other cartridges went out. After removing the PGI the others lit indicating ready. I tried installing &

...light followed by red and the smart panel showed that the printer thought that there was no toner in it. After struggling with it for an hour I hit upon the following. Turn off the printer. Take out ...