ribbon cables Had to clear item that was holding bottom roller so cartridge would stop. took top loose to be able to see. ribbon cables came loose and I need to know where to reconnect them. This is ...
Question about Lexmark X Office Equipment & Supplies
...stick up through a rectangular hole that's approximately 1/2" to the right of the print head (assuming print head is parked in the middle) and behind it. Most likely if your lever arm has fallen off, ...
...ribbon cable and the other scanner connector back in, making sure it's seated all the way. Try not to bend or kink the end of it, or it will be toast. Good luck, and happy lexmarking..... Thank you ...
...stick up through a rectangular hole that's approximately 1/2" to the right of the print head (assuming print head is parked in the middle) and behind it. Most likely if your lever arm has fallen off, ...
...stick up through a rectangular hole that's approximately 1/2" to the right of the print head (assuming print head is parked in the middle) and behind it. Most likely if your lever arm has fallen off, ...
...stick up through a rectangular hole that's approximately 1/2" to the right of the print head (assuming print head is parked in the middle) and behind it. Most likely if your lever arm has fallen off, ...
...stick up through a rectangular hole that's approximately 1/2" to the right of the print head (assuming print head is parked in the middle) and behind it. Most likely if your lever arm has fallen off, ...
...a gentle tug. It will now easily lift away from the hinges on the main body. You can remove the ribbon leads if you like. They go back again very easily. You should now be able to get your
Question about Unknown Office Equipment & Supplies
my 510s is having issues with printing. The print ribbon is sticking to the paper, thus tearing the ribbon and causing a paper jam. Ribbon is sticking to paper as it travels through the printing ...
Question about Zebra Office Equipment & Supplies
ribbon and media sticking together bypassing cutter Zebra 105SL just installed it and when I print my label the media sticks to the ribbon misses the cutter and shoots out the top or wraps around the ...
191 questions posted
Usually answered in minutes!
1,487 Questions
1,353 Questions
1,277 Questions
961 Questions
741 Questions
