Lexmark X422 All-In-One Laser Printer "remove lid stuck glass top" Questions

...remove the black plastic lid from the mirror container, exposing the mirror and top glass slide. Clean the mirror and glass slide with lens cleaner (lens cleaner for camera lenses or for eye glasses ...

...lid again and text was fixed for no reason but the glass or something had ink on it because the paper had a black shine (with one thick line more black) over the whole page. I have an OKI 5700 ...

remove the hinged lid (tilt the lid to the up position and lift directly up and off). 3) Remove the push button cover which lifts directly off - straight up. 4) At the top of the button control module

...remove the scanner lid, control panel, and scanner glass. Had that problem. The warranty ran out so I decided to open the damn thing up and unplug the keypad. This was enough to reset the all-in-one ...

...lid. Open the top cover of the AIO. Using the carrier belt, move the cartridge carrier to the middle of the unit. Remove both cartridges, close the top cover, reinsert the power supply, and power the ...

...lid, use a small allen wrench and pull the screw at the left side of the frame that holds a 1 inch wide by 12 inch long piece of glass. pot ur finger inside the housing and begin to roll the ...

stuck and won't move along the track. Any suggestions? Every Samsung multifunctional device has a scanner lock underneath the glass. This is to prevent scanner damage during shipment. Th user's manual

...lid. Make sure you removed the set ***** from at least the back of the left hinge assembly so that you can remove the "case" that holds the springs and sticky white parts. (Yes, I am a girl) :-). My ...

remove the broken hinge, 3) Screw in the replacement hinge, 4) Attach the ADF to the top of the flatbed casing by fitting the plastic posts back in their "sockets", Can anyone tell me if this correct,