...Minolta Konica 2300DL printer that is connected to the network via the wireless hub as well. Ever since obtaining this laptop, I have not been able to print to the printer other than stopping and ...
Question about Konica Minolta Office Equipment & Supplies
...konica minolta bizhub C6000 printer but display is showing controller is not connected it is a production machine Konica Minolta C6000 machine check the cable between the print controller/firey and ...
KONICA MINOLTA PagePro 1350W Each time I turn on the KONICA MINOLTA PagePro 1350W printer it adds another copy to the Printer and Faxes. I have it connected via USB. the problem it might not be the ...
Cannot Connect Konica 7075 To PC Dear sir, I cannot connect the Konica minolta to my pc. You need to purchase IP-601 Print Controller (options) for Konica 7075, from there you can connect your PC.
Question about Konica Minolta Office Equipment & Supplies
konica minolta bizhub c250 error C-2AO3 magenta toner cartridge EEPROM access error, cleaned the connection between the toner cartridge and the machine once cleaned if the issue persists remove the ...
Question about Konica Minolta Office Equipment & Supplies
konica minolta 6501 error code c-c101 Error Code C-C101, please help had a circuit board replaced recently??? if so check each and ever connection, pull each connection and reseat each connection one ...
Question about Lexmark X Office Equipment & Supplies
...konica minolta 2400w I recently bought a new laptop that runs the Vista operating system. I went to the konica minolta site, and downloaded the appropriate print driver. I can't tell, however, if I'm ...
Question about Konica Minolta Office Equipment & Supplies
konica minolta 6501 screen freezes screen freeze have tech come re-flash the firmware check connection of the control panel
sc 93-04 in konica minolta bizhub 920 Could not find that code in the service manual. Mite want to check the connections between the printer Control board other boards.
Question about Genuine Konica Minolta Office Equipment & Supplies
...connectors, remove them one by one and check each one for bent pin(s) ensure reseated properly, could also have bad firmware, requires tech, because firmware is on secure web site at Konica
833 questions posted
Usually answered in minutes!
1,487 Questions
1,353 Questions
1,277 Questions
961 Questions
552 Questions