Lexmark X7170 All-In-One InkJet Printer "cleaning scanner mirror" Questions

...scanner lamps) since it won't cost you anything to see if cleaning the mirror and lenses resolves the 944 error code. First, turn off the printer. Then, unplug the printer from the power outlet. ...

scanner lamps) since it won't cost you anything to see if cleaning the mirror and lenses resolves the 942 or 944 error code. First, turn off the printer. Then, unplug the printer from the power outlet

...scanner lamp wires are fed into the mirror container properly so they are not being pinched by the cover and so they are not blocking the mirror. Screw the two black screws back into the mirror ...

...scanner There can be a few causes of this error: 1) Firmware Revision is not latest and lamp warm-up time is too short - update firmware first: http://support.lexmark.com//printerfirmware/ Type in: ...

Lexmark x215 MFP All in one - prints fine but photocopy and faxes Documents printing fine - clear. But when faxing and making photocopies are blurrey as if toner needs to be replaced. have replaced ...

Light, Faint or Faded Copies I have xerox workstation pe120i all in one printer It has toner cartridge. When I prinout a file from my PC, I get good quality printout But, when I make copy of a paper ...

why does printed document show black line after scanning that is not on original document. no dirt on screen of lexmark x1270 Clean mirror in scanner. There is a piece of dirt on the scan glass

error message 2200, unpluged and still no print when you unplug this remove the power supply completly then give it a minute then reinstall power the unit on. if this doesnt do it us the belt to move ...

SCANNING UNIT OF MY PRINTER MULFUNCTIONS The scanner unit of my Lexmark X3580 is making a continuous clicking sound so it is unable to scan and/or make copies. I have noticed that, the toothed belt ...

will not print. says code 2200 just replaced black carterage Power off the All-In-One (AIO) off and remove the power supply from the back of the unit. Wait 30 seconds. Then reinsert the power supply ...