Question about Lexmark Office Equipment & Supplies
...message paper jam., You need to replace the printhead you may also call kodak 1 800 421 6699, and have your free printhead replacement. Most of the time overriding the error message solve the ...
Question about Lexmark Office Equipment & Supplies
...error code says printhead missing, re install cant remove printhead but it seems perfectly in place? Unfortunately, the only way to possible fix this error is to get the printhead out and reseat it. ...
...printhead 2. error 59.99 on hp colour laserjet 3700 The exclamation mark means that the magenta printhead is already low in ink or have encounter a problem. Try removing and reinstalling the magenta ...
Question about Lexmark Office Equipment & Supplies
Error, print head #4 may be defective or out of ink.
Problem
Description:
The Sub-Tank Sensor does not switch to less than half even though ink has been
consumed.
?? x = 0: Printhead
...appear on the HP Officejet D and HP Officejet 7100. Press Enter to align. If the error persists contact HP. Printhead replacement will not resolve this problem - the printer will have to be
...to verify that the problem is fixed.Should the error persist, it could be that the printhead itself is faulty. If that's the case, please contact Lexmark Technical Support for further
error. The printhead was installed in another machine and the codes do not match. You need to manually sync them. Here is the procedure: Manually synchronize the Printhead and Electronics Module codes
Question about Lexmark Office Equipment & Supplies
...error persist? Go to Step 2. Complete. 2 Check the Printhead Lock Arms. Go to Step 3. Repair or replace Do the arms rotate correctly? the Printhead Restraints 3 Check for ink spills around the ...
Error Problem Description: The Sub-Tank Sensor does not switch to less than half even though ink has been consumed. x = 0: Printhead Number 1 (Black). x = 1: Printhead Number 2 (Light Magenta). x = 2:
...Error message usually relates to Printer Failure. However you can try few steps to fix it. ( Hopefully )Turn off the Printer. 1. Open the Carriage access door.2. Remove the Cartridges and Printhead ( ...
732 questions posted
Usually answered in minutes!
1,487 Questions
1,353 Questions
1,277 Questions
961 Questions
741 Questions