Lexmark P4350 All-In-One InkJet Printer "following printhead appears" Questions

printhead The following video demonstrates how to replace the cartridges and the printhead. You do not necessarily need to replace the cartridges. Simply refer to the video for replacing the printhead

...printhead is causing the problem. Following replacement of the suspect printhead(s), attempt to verify functionality (Step 19). If the problem persists following, replace the carriage and trailing ...

...Following initialization, insert one printhead at a time, starting with the black printhead. Determine whether or not the printer accepts the printhead. Turn the printer off and repeat steps for each ...

...printhead carriage. Move the print carriage latch down, and make sure the loops catch the hooks. Snap the latch into place, and close the print carriage access door. After the message to align the ...

following the prompts that appear. The link is as follows: www.kodak.com/go/drivers • Please then remove the ink cartridges • Remove the Printhead (Upon removing the cartridges push up on the grey tab

...following printhead has a problem: magenta/cyan (M/C). Is there a way to fix this? There are two possibilities here Joanne, first, it could be a false error message or else second, the Cyan/Magenta ...

following the prompts that appear. The link is as follows: www.kodak.com/go/drivers • Please then remove the ink cartridges • Remove the Printhead (Upon removing the cartridges push up on the grey tab

...following printhead has a problem cyan/magenta - refer to printer documentation) i tried to clean the printheads but nothing happened just the flashing for both lights , but i used the same printhead ...

...Printhead appears to be missing or damaged " on the printer screen ? If so, there are few steps to be followed to resolve the issue. I cannot mention the troubleshooting steps with images for Issue, ...

...Printhead Drop Detection. This error code appears when the Printer detects that the same area of nozzles do not work in different Printheads. The possible causes are either fibres or a piece of paper ...