Question about Lexmark T Office Equipment & Supplies
...pickup rollers are dropping down, you can see this from the back if you look at the gap between the tray and body of the printer then your problem is likely that the bevel drive gear that runs the ...
...remove the paper tray. To test the pickup rollers you can take off the rubber rollers( they look like white rubber band) from the wheel and turn them inside out, this will work as a temp fix untill ...
Question about Lexmark T Office Equipment & Supplies
remove the tray. you should be able to source these from a local suplier and are very easy to fit. just make sure your gentle with the clip that holds them in place as if they break then you will need
...remove the paper pickup and feed rollers 1 Remove the cassette. 2 Locate the two rollers on the bottom of the paper pickup unit (above the cassette). The pickup roller is the smaller roller, and the ...
Question about Lexmark T Office Equipment & Supplies
...Remove the old pickup roller from the printer. Line up the black retaining tabs in the printer with the grooves in the new pickup roller, and then press the pickup roller into the pickup-roller seat ...
Question about Lexmark T Office Equipment & Supplies
...pickup roller to remove loosened dirt. Figure 7: Wiping the roller to remove dirt and debris Allow the pickup roller to completely dry before reinstalling it in the printer. Figure 8: Allowing the ...
Question about Lexmark T Office Equipment & Supplies
Remove the pickup roller. Figure 9: Pickup roller 10. Insert the left side of the new pickup roller into the left slot (1), and insert the right side (with notches in the shaft) into the right slot (2
Question about Lexmark T Office Equipment & Supplies
...pickup roller to remove loosened dirt. Figure 5: Wiping the pickup roller Removing the new pickup roller from its packaging. Position the cleaned or replacement pickup roller in the slots on the ...
...pickup roller. To check the roller simply open top cover and remove toner cartridge. Roller is D shaped and can easily be removed by gently pressing the two tabs outwards. This should pop out the ...
...remove the toner cartridge. 3. Locate the pickup roller. 4. Release the small, white tabs on each side of the pickup roller by pushing them away from the roller, and then rotate the pickup roller ...
166 questions posted
Usually answered in minutes!
139 Questions
130 Questions
122 Questions
152 Questions
41 Questions
