Question about Lexmark T Office Equipment & Supplies
...transfer roller" won't clear This is on a Lexmark T640 laser printer. This is a transfer roll error. Take the toner cartridge out and clean the area under it. The transfer roll is a roller which is ...
Question about Lexmark T Office Equipment & Supplies
...transfer roller, Charge roller, left&right transfer roll arm, HVPS & laser unit. Same problem Please help pull the toner cartridge out leave the bottom front cover open and bring down the top ...
cleaning the contacts for the transfer roller (power off printer first). The transfer roller is the black foam-like roller under the toner cartridge. Handle it with paper because the oils on your hand
...transfer roller i have two t640 lexmarks that have this problem. when i shut off and clean the transfer roller they will work fine for 3 to 4 weeks and then it will happen again. any suggestions 1) ...
Question about Lexmark T Office Equipment & Supplies
...transfer roller if a foriegn substance got on either roller they could create this problem the oil from your fingers getting on them could create this. given everything youve changed the rollers are ...
Question about Lexmark T Office Equipment & Supplies
...cleaning mirrors in a scanner check transfer roller tensions charge rollers all seem to be fine even charge scanner unit all rollers no joy. Do you have answer for me? Using new toners. Hi, The ...
...cleaning them with an air compressor or with an spray cleaner with isopropilic alcohol. Hope it helps you... if you have replaced the fuser this sounds like a paper size reporting problem print the ...
...Transfer Roller > How to Clean the Corona Wire > Supplies Needed for Cleaning the Glass on the Lexmark 4600 Series Scanners > How to Clean and Maintain the Scanner on the X50X Multifunction Printer ...
...is at end of life and needs to be replaced. If no toner is visible, try cleaning the CTD (ADC) Sensor. The ?Transfer Roller is at End of Life? is a warning. ?Replace Transfer Roller? is a hard
...belt.Remove 2 screw and change it.The bias transfer roller is mounted in two bushings,remove the bushings and 2 springs.The fuser unit : upper fuser roller,lower fuser roller and the cleaning
166 questions posted
Usually answered in minutes!
139 Questions
130 Questions
122 Questions
152 Questions
41 Questions
