tray if the stub is missing. MOST OF TOME OPENING THE COVER WHERE THE INK OR TONER GOES WILL AUTOMATICLY RESET THE COPY OR PRINTER, THE ROLLER MY HAVE INK BUILT UP ON THE ROLLERS,EXPLAIN; THE DRUM HOT
Question about Lexmark X Office Equipment & Supplies
...Tray 1 pick up roller out of the Samsung laser printer model CLP660ND.? I need to replace it This is the easy bit: Turn the printer over so that you can get at the bottom. Remove the tray and the ...
...reset? Thanks See below for Error 391: CLEANING THE FEED ROLLER AND THE PAD Clean the feed roller and the pad when [391: Paper Jam] appears frequently. (1) Remove the paper cassette. (2) Clean the ...
Question about Lexmark X Office Equipment & Supplies
...tray 2 & 3.. 3. Check PIU unit for paper jams 4. Check Fuser sensor flags. To reset the counter: Hold enter button & switch on the machine, wait till display shows cold restart, scroll to ...
Question about HP Office Equipment & Supplies
...tray. Press and hold the Cancel button ( ) on the product control panel. While holding the Cancel button ( ), press the OK button ( ). The self-test report prints. NOTE: Refer back to the steps in ...
Question about Lexmark X Office Equipment & Supplies
reset printer 5. Put only 10-25 sheets of plain white letter size paper in the input tray 6. Flip the paper stack over to verify printing on correct side. Please follow the below web link steps http:/
...reset the timing correctly. I was having the exact same problem. Then I took the time to read the error messages I was getting and it said to press the paper load button on the front of the printer ...
Question about Lexmark X Office Equipment & Supplies
Reset the Tray 2 feed counter within Service Diagnostics as follows: 1. Enter Service Diagnostics (back arrow botton with the "i" button soon as you turn it on) and scroll to NVRAM Access and press OK
...tray and the power left on. Do not reset the printer after resetting cam position. Also it might take a few attempts to get the timing reset right, so dont give up after 1 failed attempt. I have had ...
tray is full of paper. This just started happening. Any ideas? Jay [email protected] Hi This is unfortunately very common issue about MFC-8460N, There are few steps you can try, Set to factory default
1,500 questions posted
Usually answered in minutes!
1,487 Questions
1,277 Questions
961 Questions
741 Questions
552 Questions