numbers begin, then you have not chosen the right port. If this is the case, remove the phone cord from the port you have chosen and try another until you do hear the dial tone. NOTE: Do not try to go
...the phone cable you're using is still in good condition. No obvious defects. 2. There are two phone ports behind the printer- Ext and Line. The phone jack from the wall should be plugged in to the ...
Question about Lexmark X Office Equipment & Supplies
...recieve a fax. Can you please help me? Ensure that the telephone/fax line is plugged into the Line port on the back of Lexmark printer and not in the Phone port. If you have an answering machine ...
Question about Lexmark X Office Equipment & Supplies
...outlet, wait 10 seconds, and then reconnect it. - Restart the computer. - Make sure the correct port is selected in the Properties screen. To do this: Go to Start, Settings, Control Panel. ...
into a phone line and power. Make sure the phone cable behind the printer is plugged in to the Line Port and not the Phone Port of the printer. Double-check on the assigned Fax Name and the Fax Number
...connected to PAP2 and the PBX system. Ensure that your printer/fax is connected to correct Phone port on your PAP2. Advise the sender to dial your number so that there is a pause before dialing
Question about Lexmark X Office Equipment & Supplies
...the problem. Check the physical connection. Make sure the telephone cable is plugged in the Line port of the printer and not in the Ext. port. Check the fax settings in the printer. Make sure the ...
Question about Lexmark X Office Equipment & Supplies
...fax is not connected properly to the fax line. Try to check behind the printer. There are two phone ports - Ext. and Line. The telephone cable should be plugged in to the Line port of the printer and ...
Question about Lexmark X Office Equipment & Supplies
...driver. 1. Purchase or borrow an USB external CD/DVD drive connect it to the mini laptop's USB port and install the software from this drive. 2. Use a different computer and copy the contents of ...
...Make sure the telephone cable has no visible defects. Telephone cable should be plugged in the Line port of the printer and not the Ext. port. Other end should go straight to the phone jack in the ...
572 questions posted
Usually answered in minutes!
1,487 Questions
1,353 Questions
1,277 Questions
961 Questions
741 Questions