Lexmark X6170 All-In-One InkJet Printer "check scanner keeps jamming" Questions

...panel display for the area where the jam occurred. If your printer shows an error code, be sure and check the printer manual to see if that identifies the area of the printer where the jam occurred. ...

...check the power switch light if blinking. power light blinking slow - printer is out of paper. power light blinking fast - there is paper jam in paper. once, pauses and blinks again - raise the ...

...scanner to scan stuff onto the computer. it only prints and scans what you already have. thanks for any help If it shows false paper jam error try these steps : 1. Turn the printer off and open the ...

scanner portion of the All-In-One, to expose the inside of the unit where the printer cartridges are located. 3. Gently slide the ink cartridge carrier to the middle of the printer. 4. Gently move the

...scanner module has jammed. open the printer and check the paper path for possible jams. then open the scanner lid and make sure the scanner light bar is in the home position at the end of the scanner ...

...scanner lid clear jam etc. There is no apparrent jam yet the paper jam message keeps appearing If you have checked for a jam in the front and in the rear of the printer and there is definitely no jam ...

...scanner unit is closed. how can i fix this without having to buy another one? i dont have the receipt to return it. please help? mauly turn drums till it compleats full cycle You need to check Accept ...

...keeps coming up,telling me to remove back cover and remove paper jam then replace back cover.there is no paper jam,checked printer heads no paper anywhere? and paper is not low???? Check the complete ...

...me to remove back cover and remove paper jam then replace back cover.there is no paper jam,checked printer heads no paper anywhere? I have this printed and if you read (carefully) through

...scanner and I just printed one page and it came out but i wanted to print the back side of the page and so when i inserted the paper in, the printer wouldnt take the printer but it would start moving ...