...print from Dos base application in Windows xp prof. but Ml-1610 can't print from dos base , it will work on only windows hello sir first u install dos base drivers from your printer cd -see below go ...
Question about Lexmark Office Equipment & Supplies
...print from DOS mode of shared printer Authentication error comes. But password 100% correct. I can print documents in Windows mode. Printer installed @ another PC. I have shared through my LAN. Other ...
...PRINT OUT OF DOS LOTUS PROGRAM TYPE,DOES'T PRINT AND LOCKS UP,UP GRADED TO A UBS PORT TO A PARALLEL. HAVE XP. HAVE A DYNEX CONVER TER CABLE, The problem is, the DOS program tries to print to LPT1, ...
...dos pls tell me wht to do You have to add this printer to windows XP. manual installation should be done. hi, please find me a solution that how can i print from excel/word . with rgds thanking you ...
Question about Lexmark Office Equipment & Supplies
print in Dos Programme with USB Printer I am still using a Dos Programme (running in Windows XP ) supporting only Parallel Printer . Can I print this Dos programme with USB Samsung ML 2010 ? Thank you
...print from a DOS box from windows if using a USB cable. In laser jet,if your connectivity is parallel cable, from your computer to your printer then follow this instructions to print. From a command ...
...print from DOS to most "intelligent" USB printers (Hi end Laser, Dot Matrix etc). It probably won't work with "dumb" GDI printers or All-in-ones where Windows has to do all the work. If the printer ...
...print out from dos base softwear If you are using a NT based Windows (ex. win nt, win 2000, win xp, etc...) you could try sharing the printer than MAP it as a network printer and direct it to a ...
print from MS-DOS apps. 1. Share the printer on a networked windows computer. Make sure you make the name MS-DOS compatible. 2. At a DOS prompt, type the following command: "net use lpt1: \\servername
completed successfully " than you have your shared printer connected to a virtual port (LPT2) now it is just a matter of setting your DOS software to print to LPT2... and VOILA! it prints... Good luck
191 questions posted
Usually answered in minutes!
1,487 Questions
1,353 Questions
1,277 Questions
961 Questions
741 Questions