Logitech Cordless MouseMan Optical Wheel Mouse LT9304960403 "stuck receiver" Questions

receiver is the item that is stuck into the port on the computer that the cordless mouse communicates with. If it is not in the port, the mouse cannot send signals to it. The mouse is considered to be

...reciever lights are stuck on anf the key board and mouse wont work. any ideas? Does re-doing the Connect process work? [i.e. press the button on the receiver, then on the mouse - repeat for

...receiver physically STUCK. With no earlier damage to the usb port or mouse receiver to blame or trigger, the nano usb receiver of my microsoft mobile 4000 mouse has become physically STUCK in the usb ...

...stuck, tried to reboot computer etc, still not working.. The problem is not the mouse itself... it is probably the USB receiver. Most likely there is a loose connection. try removing the device, then ...

receiver stops flashing. Check to make certain the button under your mouse does not get stuck in the depressed position and releases. Also, make certain you complete this resynchronizing process in 60

...fresh battery releasing simultaneously the button. Unless said button is stuck press it gently down a couple of times, it must be out for as long as the receiver in the USB port. Good luck!!

...stuck and won't move. Have receiver plugged into USB port on LCD monitor ports. Running Windows XP service pak 2. HELP!!! This is my Wife's buisness system and she is not able to work well with this ...

number lock keeps going off there is a possibility that the NUM KEY is stuck down, especially if u have spilled something there and it dried up. Try lifting the key manually, with a very small screw ...

...receiver is placed at the bottom of mouse. There are two possibilities for turning on the red light, one is that said button is stuck,if that is the case push it down a couple of times and see if the ...

stuck I just took my acer n745 out of the box and it will not release the usb receiver. Acer doesn't give me a tech support number or anything. The top should have a button to release the receiver (on