...wire or plugs or wires making contact, you can reset the unit with the directions above, replace or separate the wires and all should work. If the issue is within the unit, you'll have to contact ...
Yamaha amplifier not turning on check ur speaker wires, try disconnect all wires from back of unit and then try to turn on unit . if it stays on whit no wires attached than u have short connection at ...
Question about Yamaha Audio Players & Recorders
unit displayed "check SP wire" then shut off. We repeated the same sequence of events several times. We checked all the wiring plugged into the unit and it was correctly installed. Is this repairable?
Yamaha RA-V1200 wont turn on check ur speaker wires, try disconnect all wires from back of unit and then try to turn on unit .if it stays on whit no wires attached than u have short connection at ...
...turn on when left off for some time check ur speaker wires, try disconnect all wires from back of unit and then try to turn on unit . if it stays on whit no wires attached than u have short ...
...very often and refuse to comes on. check ur speaker wires, try disconnect all wires from back of unit and then try to turn on unit . if it stays on whit no wires attached than u have short ...
Question about Onkyo Audio Players & Recorders
...wire (not too thin!) and see if anything changes. Unplug everything from the unit and then hook up one and only one speaker and see what happens. Move the speaker wiring from one set to another, see ...
Question about Audio Players & Recorders
...wire powered by your car stereo/head unit. When your head unit is turned on it will in turn power up the sub amp. Of course the sub woofer need to be wired to the amp. For the signal/audio wiring, ...
Panasonic stereo SA-PM28 displays fault code F61 then switches off Hi dearnley1 The error code your unit is presenting relates to either a speaker cabling fault or a fault speaker. Sometimes, it is ...
Question about JVC Audio Players & Recorders
...wire that should provide a continuous feed so the unit can keep its settings actually being from the ignition switch, and the continuous feed wire being connected to the terminal that should be from ...
9 questions posted
Usually answered in minutes!
20 Questions
15 Questions
2 Questions
2 Questions
3 Questions