Sony Str-Se501 Stereo Receivers "fix receiver protect mode" Questions

...receiver is in protect mode then that is one of two things. one there may be a power short some were in the power setup that needs to be fixed before it will function correctly again. two a fuse or a ...

...mode.What's the fix? Disconnect all speakers at the receiver, if it stays on, post a comment and I can help you troubleshoot further. If it stays in "protect" it needs serviced. Hope this

...receiver is in protect mode. Hi! On Friday I left home, receiver was in order, today I came back and turned on my receiver, but it wont start. It displays protect mode and then it turns off again. I ...

...protect mode and after about 3 seconds it turns off. Is there any way I can fix that? Is it doing this while you have it turned right up? Most systems have protect mode because you are trying to draw ...

...receiver, but still goes into protection mode after 30 seconds. Any ideas as to how to fix, or is it now e-waste? Audio Amplifier IC damaged Francisco revisa la resistencia fusible r525 y todas k ...

protect mode try it again. Dont know if this is the proper way to fix the reciever but it worked for me. Good Luck HK protection circuits are complicated. They go into protect for overload, DC detect,

fix it. I'm handy. This indicates a load on the system, turn receiver off, remove speaker wires from the back of the unit. Now power up and turn volume right down, if the word protect stays off, there

technician. Protect occurs when 1 or more of your speaker wires is touching somewhere. Power off the receiver, connect speaker wires to receiver and speakers again, power back on, should fix the issue

...fix cpu on protection mode switch on but it goes on protection mode when it should start playng I am highly skeptical that the CPU is the problem; protection mode is designed for protection of the ...