Sony Str-Se501 Stereo Receivers "fix audio protect" Questions

...protect message means that the outputs are shorted. This is a fairly common problem that can easily be fixed by any shop that handles audio gear. Expect a parts cost in the $20-$40 range. Dan one 12 ...

...mode after 30 seconds. Any ideas as to how to fix, or is it now e-waste? Audio Amplifier IC damaged Francisco revisa la resistencia fusible r525 y todas k correspondan a la estapa de ...

...and wont stop how do i fix this problem I have a problem with my divinci dv-208 the protect button just started coming on and wont go away! The audio amplifier IC are damaged you need to

fix it. I'm handy. This indicates a load on the system, turn receiver off, remove speaker wires from the back of the unit. Now power up and turn volume right down, if the word protect stays off, there

...protect mode then that is one of two things. one there may be a power short some were in the power setup that needs to be fixed before it will function correctly again. two a fuse or a compactor is ...

...audio protect still keeps coming on. i then reset the memory and that didn't work so i called sony help. they told me that i should unplug the receiver for 30 minutes and to take it to nearby dealer ...

fix my marantz sr 500 of not going into protect mode when putting on? Change the audio amplifiers IC´s because are on short circuit Your receiver has DC Offset, meaning a damaged amplifier. If you are

...went bad. It's now protecting your speakers from that badness. You need to get the receiver fixed or

...fix this myself???? First, disconnect all speaker wires from the unit and power it back up. If it does not go into protect. post a comment and I can walk you thru troubleshooting. If it goes into ...

...mode.What's the fix? Disconnect all speakers at the receiver, if it stays on, post a comment and I can help you troubleshoot further. If it stays in "protect" it needs serviced. Hope this