...and see remote front through camera and press volume buttons, if you see IR LED blinking then remote is fine and amp has problem with volume. Let me know exact model of Sony amp to see its
...there be a light on it or on the sensor on the front of the unit? no lights. look at the remote control trough your digital camera (video mode) and you will see a flashing light if the remote
...front of the camera and press a button. If the remote is functioning, you will see a red flashing light on your camera screen. If not, check the remote's batteries and connections at the battery ...
front of a cell phone or camera any push buttons on remote . you should see the IR diode illuminate white in the camera display. if not the remote is not working. check the obvious. Batteries, contact
Question about Audio Players & Recorders
...camera, I use the one on my phone, aim it at the transmitter on the front and push the volume buttons. You should be able to see rapid flashes but only through the camera. This should at least narrow ...
front left and rear left speakers ( both will get the same information). Ditto with the right channel. The center channel will get centre channel information. If all the speakers work, go out and rent
...front of a video camera and it worked. I also tried to reset the remote by unplugging the unit and removing the batteries and pushing all the buttons on the romote, still nothing. What now? The ...
front panel of the amp, The detectors sometimes go. all these things to be checked, but check the remote for infrared light with a camera first. Good Luck, a rating of "FixYa" for these technical tips
Question about Onkyo Audio Players & Recorders
...camera display. If you see a white light when you press buttos remote is working. Remove the top cover, remove front cover and resolder connections on remote receiver. If you intend to do this let me ...
Remote control does not work The easyist way to find out if the remote control itsself works is to watch it with a digital camera oder cell-phone camera while pressing a button. Normaly the IR-LED is ...
1 questions posted
Usually answered in minutes!
10 Questions
0 Questions