Harman Kardon AVR 70 "power jack bad connection" Questions

Ad

Question about Sony Audio Players & Recorders

1 Answer

..."bad" speaker and wiring in another port.. if it works then the speaker and wiring is good and you have to check actual jack in which you were asking and back to auto amplifier circuit or

Ad

Question about Yamaha Audio Players & Recorders

1 Answer

...jack in and out etc.But the problem returns. Is their a better fix for this without major cost? Thanks. Tony Are you saying you HAVE an external amp? Is it NOT theYamaha DSP-A1? BOTH channels? That ...

Ad

Question about Denon Audio Players & Recorders

1 Answer

...power cuts off a few seconds after turning the unit on). The most likely problem is a bad speaker. to find out which speaker is causing the problem, do this. Start out with just one speaker connected ...

Question about Audio Players & Recorders

1 Answer

...power is off. Your cable might be bad and they are easily purchased and replaced. If it is on your "stereo", then check the RCA jacks. You can reverse the left and right RCA jacks to see if the ...

Question about Pioneer Audio Players & Recorders

1 Answer

...power supply, it could be a bad speaker or a bad output channel inside the receiver if this happens only when it gets turned up loud. The overload warning happens when the amplifier circuit has ...

Question about Kenwood Audio Players & Recorders

2 Answers

power button blinks like it's overloaded. Took off the cover and it does not look too bad? Its usually not a fault that you will see unless somethings burnt up. This is solid state electronics and you

Question about Denon Audio Players & Recorders

1 Answer

...jack you now have a 4 ohm load. That is below the ratings and can cause the amp to shut down (go into protect). Since your amp shuts down right away, I think you have a bad speaker or way too many ...

Question about Audio Players & Recorders

1 Answer

...jack wiggle around with the cord tension. resulting in a solder connection breaking at the board. But that usualy will give a ground hum or no sound at all. So im leaning towards a blown speaker. ...

Question about Onkyo Audio Players & Recorders

1 Answer

power plug and nothing will bring it out of that mode. It could be bad connection in microphone input jack and receiver think that the microphone is still plugged in. try to plug/unplug the microphone

Question about Audio Players & Recorders

1 Answer

...jack has power , move onto the next step Check all the connections at the Receiver, both ends of the power cord if this no power plug the receiver in and see if you can hear it start up or make any ...

Not finding what you are looking for?
Audio Players & Recorders Logo

27 questions posted

Ask a Question

Usually answered in minutes!

Top Harman Kardon Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

John
John

Level 2 Expert

510 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Are you a Harman Kardon Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...