...receivers so setting the receiver to 8 ohms and running the 6 ohm speakers shouldn't be a huge problem. I wouldn't crank the volume though if i were you but at a decent level you should be
Question about Yamaha Audio Players & Recorders
6 ohm speaker for each side and set the impedance to 6 ohms or am I stuck with having to have two 8 ohm speakers for each side if I want the presence feature to work. Also if I wanted to run some very
Question about Sony Audio Players & Recorders
...running 6 ohm speakers safely for almost 3 years now. A way to check your speakers out is to take an ohm-meter across the terminals on them(with the receiver unhooked). They should read anywhere ...
...speakers for back of hall, of 6 ohms each. One rheastat available. How do I connect these to the amplifier, please? You don't need to use the rheostat. If your receiver is 8 Ohms you can run all the ...
Question about Sony Audio Players & Recorders
...running 6 ohm speakers safely for almost 3 years now. A way to check your speakers out is to take an ohm-meter across the terminals on them(with the receiver unhooked). They should read anywhere ...
Question about Sony Audio Players & Recorders
...6 ohms impedance for an 8 ohm impedance amp clearlydenotes that it heats up the output stages.(please forgive my very technical words) • One way to lessen the heat is to install a blower .Use a ...
Question about Onkyo Audio Players & Recorders
...6 speakers up to this receiver as follows. Front: Bose Acoutimass 3 series IV impedance between 4-8 ohms per Bose CS No set impedance Center: Bose V10: 6 ohms Rear: three ceiling installed speakers ...
Question about Audio Players & Recorders
...6 ohm speakers with receiver and this is find. I want to connect 4 speakers all 6 ohms impedance and need to know if this is safe for the receiver (and speakers). The back panel states when connected ...
Question about Onkyo Audio Players & Recorders
...6 ohms. Is this a problem or nothing to be concerned with? Nope.. 8 ohm's is the best speaker for it, anyway. receiver will run coler just leave the settings as default. it just means that any ...
...running 6 ohm speakers just fine. What few people realize is that this impedance rating is not fixed like a resistor, it changes based on frequency. Anyway, all the rating means is that you have to ...
69 questions posted
Usually answered in minutes!
143 Questions
114 Questions
88 Questions
77 Questions
70 Questions