NEC PGA370 SIS620 ATX Motherboard (1510002500) "option rom" Questions

ROM OPTION" Some computers allow you to select an alternate boot device by pressing the F12 key as you boot up. If your computer doesn't have this option then go into the BIOS configuration and change

...option. Have run fast boot in both enabled and disabled mode to no avail. Can anyone help with this? Once I can add the rom and hdd I can rock and roll from there, I just have hit a wall with my ...

...CD or DVD ROM is defect in the wire that connects the drive and the motherboard (a red flattened wire). change it and let your PC find it or give some hand with option find new hardware.

option : 1) Check the master and slave jumper settings of hard disk and CD-ROM. Hard disk jumper setting should be Master and CD-ROM should be slave. 2) Check the cable of hard disk and CD-ROM. 3) Use

what should i do if my dvd rom is not detecting any cd or dvd If you can see the dvd rom drive in my computer option then the laser has failed in the drive and it will need to be replaced. Good Luck.

how to detect cd rom to boot First you must set it in the bios. You set it the primary boot option Cd-rom Then use a cd that is bootable. Ok to go in the bios Press the "del" button cheers uttam

...option for SATA controller gives- Disabled, IDE to ROM and RAID to ROM options. I tried both settings but my 500GB SATA is detecting as 500GB unallocated though it has four 100GB partitions and data ...

...set your first boot to cd room wen the main ibm screen comes press f1 then then select start up options than click on the 1st boot device than change it to cd ...

...the Windows XP CD-ROM into the CD-ROM drive, and then restart the computer. Click to select any options that are required to start the computer from the CD-ROM drive if you are prompted. 2.When ...

Option ROM Initialize error,(1011 0010). I just installed a new power source, from Intel. The faulty one was suddenly giving 1-5-4-2 beep code. The new power source stops with the 1011 0010 post being