Question about Canon PowerShot Cameras
reset factory settings and still the same thing white screen, I can see the menu but still cant see a pitcure, please help. This sounds like it might be a defective CCD imager. If so, Canon should fix
...reset everything back to the factory defaults. No change. I tried a new memory card as well. It makes no difference which mode it is on. This sounds like it might be a defective CCD imager. If so, ...
...reset the camera in the menu to the factory settings. If not help service only. This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free ...
Question about Canon PowerShot Cameras
...factory reset to wipe out any wrong buttons pushed? I take a lot of indoor shots in rapid succession...will it overheat and cause a loose solder connection> It has been intermittently going down-hill ...
...factory reset by holding down menu button, arrowing over to "OK" (again, doing this all blind with no LCD) and it seems to work because all the default sounds are back. It seems to shoot ok. ...
...factory reset worked perfectly. press the Display button for several seconds and a screen comes up asking if you want to do a factory reset, say ok, and the lcd lit up. p. bright I had the same ...
...factory reset canon A95 Two ways. 1. Go into the setup menu and scroll to "reset"...follow the on-screen instructions. 2. Remove the card and battery...press all the buttons...leave the camera alone ...
how to reset canon powershot a95 to factory defaults Press menu - select settings (set up), scroll down and locate, RE-SET or 'INITIALIZE' Press on that option and follow the prompt on the screen.
62 questions posted
Usually answered in minutes!
944 Questions
808 Questions
687 Questions
597 Questions
590 Questions