...changed to B&W, then a portion of the picture is brought back to color. The image is then flattened and saved as a different file
...image is black. The upper quarter is visible and the line between the two areas is blurry, not defined. Check out this website http://www.lotek.nu/misc/EOS_300D_sub-mirror_repair/ I had the same ...
...it (probably not as you've already used it in other cameras, but double-check anyway). Unbending a flattened pin usually breaks it off or just leaves it weakened sufficiently to break off in the
...image was black and captured images were black (although high ISO images showed obvious amplifier grain). I opened the camera, took over the face plate, and turned the camera on. It immediately ...
...photos in open terrain - it will not work miracles, but will add light to your subject (however, flattening some details). You might also consider overexposing in the camera settings to get more ...
...I attempted to put it back in, it will not go all the way in The card must have gotten slightly flatten. Try to wiggle it
...fine. Another tool that I sometimes use is a stiff wire with a bent hook on the end to get very flattened pins started. Take your time and use as much patience as you can muster (take a breather ...
215 questions posted
Usually answered in minutes!
944 Questions
808 Questions
687 Questions
597 Questions
590 Questions
