battery needs pressure to keep it in contact. If you still have the cover and it just broke off I would tie it down to the camera body with a strong rubber band. It is not a pretty fix but it will get
...battery door and put on the replacement. Does this mean you have a replacement door already? If so, you will need to figure out how the camera comes apart. This is not always easy to do. I suspect ...
...Mine was the microswitch that tells the camera the battery / card door is closed. The tiny, cheap plastic protrusion that pushes on the switch broke off. Jam the switch with the end of a
Question about Canon PowerShot Cameras
...battery works good.. becuase i brough 2750Mh Nikon original and recharged for 2 hours as per manual and i was able to take >65pics and if i use alkaline , i would reach 200pics without flash and ...
Question about Canon PowerShot Cameras
...small piece of plastic broke off the battery door or the nub got broken/pushed in too far for the battery door to trigger it. Try using a dab of hot glue to keep the nub pushed into the down
...contact canon and see if they will honor your problem according to this advisory ...
Question about Canon PowerShot Cameras
...and latch it, it should hold the battery in place. That orange clip just holds the battery low enough that it comes in contact with the terminals at the bottom of the compartment. Hope this helps ...
Question about Canon PowerShot Cameras
......
...Battery cover locks are broke an will not stay lock down And now you can't use the camera? the cover must be closed complete. There is a switch, to check if the cover is closed. this is checked, to ...
Question about Canon PowerShot Cameras
...broke the battery contacts inside the camera. Another is that the drop damaged or broke something else inside the camera.First, try another battery pack. If you don't have one, go to a Nikon ...
187 questions posted
Usually answered in minutes!
944 Questions
808 Questions
687 Questions
597 Questions
590 Questions