Canon PowerShot S1 IS Digital Camera "flash pop" Questions

...flash WILL pop up when I hold the button halfway down. It won't flash, though. It is normal that when you press the shutter button half the flash won't fire because you're focusing on a subject upon ...

Flash did pop up once and operate properly but refuses to do so again. Is there a way to manually deploy it? The rest of the camera works fine. This also happened to my camera and I am able to pop the

canon powershot S5 IS flash made popping noise then quit altogeth canon powershot S5 IS flash made popping noise like a small firecracker and now it won't flash at all. camera seems to work ok ...

flash will not pop up There may be something obstructing it from popping open. Inspect the flash area carefully. You could remove the battery and put it back in to see if it corrects the problem. Also

...flash on my Canon S1 does not pop open. Any suggestions to gently rel;ease it or hints as to how I can manually trigger the release. Not sure where it is located. I want to make it so the flash is ...

flash and trying to take a flash photo. Again the work-around is to power down the camera, pop-up the flash and then power it back up. Confirmed these behaviours in two other cameras of the same model

Flash does not activate Even when I place the camera in a dark closet flash will not fire I had this same problem on my pro1. I went and bought an external flash so that I would have a flash at least,

Cannon Powershot SX210IS: On turning on camera in Auto mode, the flash pops up, but the icon on right side is a no-flash (flash with line through) icon. When I try to take picture in dim light, the ...

flash will not fire Not much info to work with (no model number), but if your flash is the type that needs to be popped open, and you have done this, also check your camera settings. There is often a ...

pop when the flash was used and now the flash doesn't work anymore. I read that alot of people had the same problem and that it stems from athe hing in the flash. Do you have any ideas for fixing it??