...stuck lens cover is a fairly common problem, but it is normally easy to fix. A single grain of sand jamming the cover mechanism is normally the culprit, and you want to try to dislodge it. There are ...
...spring loaded, so when you press down on it, it will pop out. If the card is stuck solid, don't try and force it out. Be gentle and try coax it out with some needle nose pliers. If you feel the ...
...stuck and wont come out.. how do i get it out?? They're spring loaded. Push on it again, and it should release the mechanism to pop it up or... you put it in wrong, in which case, needle nose pliers ...
...spring loaded and move freely. If either is stuck down that is you problem. You could try a TINY amount of Iso-Propyl alcohol on a cotton bud to clean them if stuck. Please post if this helps you so ...
stuck in Huawai M860 The SD memory card slot is spring loaded, to insert the memory card insert the card into the SD memory slot with the SD card contacts going in first and gently push it in until it
spring loaded post on the release button side of the flash. Check to see that it is not stuck in in any way. If so that is why you are getting error 5. To repair you can try a qtip an a little rubbing
...spring loaded so they stick up when the flash is up. check they are not stuck and if needed clean with A VERY LITTLE iso-propyle alcohol an a cotton bud. If the camera works OK when you have manually ...
...spring loaded and may jump out at you. There is occasionally a seperate cover over the gears that move the lens, remove and inspect this, very often sand will get in here and cause the problem. Use a ...
157 questions posted
Usually answered in minutes!
944 Questions
808 Questions
687 Questions
597 Questions
590 Questions
