restriction due to bad water.Check the saddle valve at the water heater first then check for postive water flow at inlet to the solenoid valve,if you have water flow the valve is clogged with sediment
...solenoid. If I remove the insert water flows. Is the insert to restrict the water flow? yes, the water will flow to quickly without it. you can use a very small dill bit to clear it. if it flows to ...
...flows I have HE220A1019. The water continuously flows now. What should I check/replace first -solenoid? Check to see if the solenoid is still getting voltage after unit shuts off. If it is not ...
...and just turning the valve in and back out clears it out and allows the water to flow. check to see that you have water flow at the solenoid and if you do then it is probably the solenoid that is
...should only drain when the humidifier is on and not flow continuously. Usually the humidifier will keep draining water when the solenoid is stuck open and should be replaced with a new solenoid
...solenoid to enrgize. if you do this and water does not flow, you most likely have a bad water soenoid. it is either electrically bad, or just plugged with water deposits. sometimes you can pull it ...
...to flow with out call then solenoid valve has failed open. hope this helps.suppling an owners manual in case you need one. ...
...flow going into the solenoid or the valve itself is going bad. I would check the saddle valve first and make sure you are getting a good stream of water to the solenoid valve, sometimes sediment gets ...
...flow through solenoid I had this installed a few years ago - never worked great. Recently I couldn't get any water to flow through the solenoid. Have 24 volts to solenoid when furnace is on ...
water continues to flow through the solenoid after Water continues to flow through the solenoid after the power is off. your only option is to replace the solenoid
67 questions posted
Usually answered in minutes!
16 Questions
2 Questions