Nikon COOLPIX S3300 "camera button working" Questions

I press the on/off button, the camera wont work When I press the on/off button, the camera wont turn on. It is not that the battery is dead, as it is fully charged. no the switch is dead - what camera

...Camera. Can't get the autofocus to work. Any tips? Make sure the AF/MF mode button on the lens is set to AF. What focusing mode do you have selected in the camera? Single Shot, AI focus or AI Servo? ...

...button and it takes the picture. The camera has to meter the light and set the exposure, and acquire focus. This is true of just about all compact and bridge cameras, though they're getting better at ...

...camera for a very small reset button. If one is there, turn camera on and press for about 2 seconds. With camera off, remove lens and with a slightly moistened pad, clean electrical contacts on bot ...

...focus and does not allow you to take a picture. Or the scene is to dark. When the camera is in Autmatic, and a working memory card is installed every thing should work fine. Let me know how you go

...button back and forth a few times or removing the lens and cleaning the contacts between the lens and camera body. Generally the "L" series lenses are pretty resilient in construction of offer the ...

...button to see if your camera will display stored pictures. My daughter dropped her boyfriends 1060 in muddy water the other day and I cleaned it enough to get it to show pictures but couldn't get the ...

camera lens went blank, will not turn off, no buttons work Was zooming in on a picture I took and everything went blank and stopped working Suspect dead battery. Charge os replace. Then turn off and ...

The screen went blank and camera will not turn off. None of the buttons work I was zooming in a picture I had taken when the screen just went blank. none of the buttons work, it will not turn off, ...

...button for 10 seconds for camera to shut down. Remove battery. Pres power button. Put the battery back in. Press power button again. When after powering on, please check if there are firmware updates ...