Vivitar Konica Autoreflex T W/hexanon F1.8 Lens Konica 28mm F3.5 & 135 Mm F2.8 "lens release button" Questions

...lens release button on a camera body. Press this button or tab, then turn the lens clockwise, exactly the same way you would remove the lens from the camera body.Without knowing the make of the ...

pushing the button! does the lens have to be connected to the camera or is there some trick??? Attaching the lens will make no difference. It sounds like the release button on the camera may be faulty

...lens release button, which is located on the front of the camera, while turning the lens. Sometimes a little bit of force is needed, I've found new lens' can stick a little bit. If it still ...

...release button, I came to find this to work. You just got to get it through your head that the camera & lens is worthless in this configuration and one or the other will give with force. every person ...

lens will focus and unfocus and refocus constinely. Is this normal?? You did not say which camera body you are using, but you probably have three different auto-focus modes on you camera. You might be

...lens is set (stopped) down to the taking aperture. The modes I've used for this have been mostly manual but lately I found that "AV" worked equally well and the camera metered to the proper exposure. ...

...lens to its smallest aperture (largest f/number) and lock it in place. If you need to, you can control the aperture by turning the subcommand dial (the one in front, under the shutter release button, ...

...lens? Do I need to align somehow to release/remove cover? Thank you for your assistance. SandyBucket usually there is a little pin on the inside that the cover presses down, maybe the lens cover was ...

film release button is stuck Hi,try putting a bit more tension on the film using the winding crank & it may enable the button to depress,regards,dave

...lens release pushes fine, and the lens will turn, but not enough to click and release. Help. Hello, While turning the lens look at the lens mount. Does the lens turn but the mount stay stationary? If ...